The L5504RVF20P Series
Units are C-Bus relay-switching devices designed to be
mounted in electrical switchboards or similar enclosures.For
ease of installation,they are DIN rail mounted, measuring
12 DIN modules wide.Four independent voltage free relay
contacts are provided for general switching applications.
The units include all C-Bus Learning features,which allow
the units to be programmed without the need for a PC connected
to the system.Alternatively, units can be programmed via
a PC and the C-Bus Installation Software.
Clipsal C-BUS lighting products are the probably best
type of lighting systems to use with Comfort. Clipsal
and Cytech work closely together to produce the most compelling
integration combination available today. Comfort communicates
with the C-BUS components using the [UCMCBUS]
module.
The series includes units complete with 20A rated relays
for resistive,inductive or fluorescent loads. The units
consume no current from the C-Bus network during normal
operation.The Series includes units available both with
and without a 200mA C-Bus power supply for powering other
C-Bus devices connected to the network (e.g.,C-Bus Key
Input Switches,Touch Screens,PIR detectors,etc). C-Bus
connections are conveniently achieved at the unit through
the use of RJ45 connectors,allowing similar units to be
quickly looped together.
This Series of C-Bus units is capable of generating a
C-Bus clock signal and providing a C-Bus network burden.Both
the clock signal and the burden are selectable through
the C-Bus Installation Software. Local toggle buttons
are included to allow individual channels to be toggled
at each unit,as well as via C-Bus commands.Remote ON and
OFF facilities are available,permitting all channels to
be turned ON or OFF without C-Bus network communication.
The unit optically isolates the mains power from the safe
extra low voltage C-Bus network. LED Indicators are provided
to show the status of the C-Bus Network and the status
of the unit.
Installers are encouraged to attend the Clipsal courses
to familiarise themselves with the installation, programming
and commissioning of Clipsal CBUS products.
|
Technical Details
|
L5504RVF20P Series C-Bus 4 Channel
20A DIN Rail Relay
Provides four independent voltage
free relay contacts in a 12M wide DIN
rail enclosure.
Complete with 4 independent 20A
rated relays (resistive,inductive or fluorescent
loads).
Units available both with and without
a 200mA C-Bus power supply not included
Up to 100 units without power supply
or 10 units with power supply are permitted
on any one single C-Bus network (255 networks
available in a C-Bus installation).
Configured via either the C-Bus
Installation Software or via the Learn
Enabled Features.
Local ON/OFF toggle buttons allow
individual channels to be manually overridden
at each unit.
Remote ON and OFF facilities permit
all channels to be turned ON or OFF without
C-Bus network communication.
The C-Bus and output stages are
electrically isolated.
Incorporates C-Bus Network Status,Mains
Power Status,and Load status indicators.
Capable of generating a C-Bus clock
signal if enabled.
A network burden is incorporated
and is software selectable.
Logic states (AND,OR)configurable
via installation software.
Relay interlocking feature selectable
via installation software.
Incorporates power recovery options
to restore loads as was ,off
or on .
2 x RJ45 sockets are incorporated
to facilitate the C-Bus connection.
Supplied with a 300mm C-Bus Category
5 patch lead complete with pre-terminated
RJ45 connectors.
The output terminals accommodate
2 x 1.5mm 2 or 1 x 4.0mm 2 cable.
EMC Compliant to meet the requirements
for marking with the CE and RCM marks.
Incorporate magnetically latching
relays.
Capable of being programmed via
the installation software without the
need for a mains connection.
Draws 18mA when being programmed
and no mains connection is made.
When a mains connection is made,then
the unit
does not draw any current from C-Bus.
Dimensions: H = 85mm, W = 215mm, D =
65mm.
|
 |
|
|
