The L5504RVFC Series
units are C-Bus relay-switching devices designed to be
mounted in electrical switchboards or similar enclosures.
For ease of installation, they are DIN rail mounted, measuring
2 DIN modules wide. Four independent voltage free relay
contacts are provided for general switching applications
Clipsal C-BUS lighting products are the probably best
type of lighting systems to use with Comfort. Clipsal
and Cytech work closely together to produce the most compelling
integration combination available today. Comfort communicates
with the C-BUS components using the [UCMCBUS]
module.
The units include all C-Bus Learning features, which allow
the units to be programmed without the need for a PC con-nected
to the system. Alternatively, units can be programmed
via a PC and the C-Bus Installation software. The Series
includes units complete with 10A rated relays for resistive,
inductive or fluorescent loads and separate units complete
with relays rated at 10A resistive load and 1A fluorescent
load. The units consume no current from the C-Bus network
during normal operation.
The Series includes units available both with and without
a 200mA C-Bus power supply for powering other C-Bus devices
connected to the network (e.g., C-Bus Key Input Switches,
Touchscreens, PIR detectors, etc). C-Bus connections are
conveniently achieved at the unit through the use of RJ45
connectors, allowing similar units to be quickly looped
together. This Series of C-Bus units is capable of generating
a C-Bus clock signal and providing a C-Bus network burden.
Both the clock signal and the burden are selectable through
the C-Bus Installation software. Local toggle buttons
are included to allow individual channels to be toggled
at each unit, as well as via C-Bus commands.
Remote ON and OFF facilities are available, permitting
all channels to be turned ON or OFF without C-Bus network
communication. The unit optically isolates the mains power
from the safe extra low voltage C-Bus network. LED Indicators
are provided to show the status of the C-Bus Network and
the status of the unit. Like all the other units that
make up a C-Bus system, the DIN rail C-Bus units are Australian
designed, developed and manufactured by Clipsal Integrated
Systems Pty Ltd. C- Bus 4- Channel Relay,
Installers are encouraged to attend the Clipsal courses
to familiarise themselves with the installation, programming
and commissioning of Clipsal CBUS products.
|
Technical Details
|
L5504RVFC Series C-Bus DIN Rail Relay
Modules
Provides four independent voltage
free relay contacts in an 12M wide DIN
rail enclosure.
Units available with 10A rated
relays (resistive, inductive or fluorescent
loads) and separate units with relays
rated
at 10A resistive and 1A fluorescent.
Units available both with and without
a 200mA C-Bus power supply on-board.
Up to 100 units without power supply
or 10 units with power supply are permitted
on any one single C-Bus
network (255 networks available in a C-Bus
installation).
Configured via either the C-Bus
Installation Software or via the Learn
Enabled Features.
Local ON/OFF toggle buttons allow
individual channels to be manually overridden
at each unit.
Remote ON and OFF facilities permit
all channels to be turned ON or OFF without
C-Bus network communication.
The C-Bus side and output stages
are electrically isolated.
Incorporates C-Bus Network Status,
Mains Power Status, and Load Status indicators.
Capable of generating a C-Bus clock
signal if enabled.
A network burden is incorporated
and is software selectable.
Logic states (and,or) configurable
via installation software.
Relay interlocking feature selectable
via installation software.
Incorporates power recovery options
to restore loads as was, off
or on.
2 x RJ45 sockets are incorporated
to facilitate the C-Bus connection.
Supplied with a 300mm C-Bus Category
5 patch lead complete with pre-terminated
RJ45 connectors.
The output terminals accommodate
2 x 1.5mm 2 or 1 x 4.0mm 2 cable.
EMC Compliant to meet the requirements
for marking with the CE and RCM marks.
Incorporate magnetically latching
relays.
Capable of being programmed via
the installation software without the
need for a mains connection.
Draws 18mA when being programmed
and no mains connection is made.
When a mains connection is made,
then the unit does not draw any current
from C-Bus.
Weight: 600g.
Dimensions: H = 85mm, W = 215mm, D =
65mm.
|
 |
|
|
