Local Expansion Options


The Local Expansion Modules allow additional zones with tamper protection and 12v outputs to be added to the Comfort Pro or G2 system. They may ONLY be sited within the Comfort CPU or the Slave Expansion Panels. This version piggy-backs onto the main PCB using 25mm pillars. End of Line resistors, screws, mounting posts and ribbon cable are supplied within each pack. The additional zones become available when they are added manually using the Engineer Menu: 'Zone Settings' or via the Comfigurator PC program.The outputs are negative triggerred with a common +12v. Zones may be normally open, closed or receive a negative trigger.

The LEM01-G1 may be used with Slave Expansion panels to provide a total of 64 zone inputs and 64 x 12v outputs.

This is achieved with Comfort Ultra2 CPU, 3 x SEP02-G2 and 4 x LEM01-G1.

Local Expansion Board with 8 zone inputs and 8 x 12-Volt outputs. Connects to the Main Control Panel or SEP01 via ribbon cable. Each output can deliver 100 mA up to a combined auxilliary current of 1.35 Amp. Includes 12V Auxilliary supply terminals.	Part No: LEM01-G2 64 zones maximum
16 zone Local Expansion Board connects to the Main Control Panel via ribbon cable. Each zone may be wired as DEOL or non EOL. LEM03 CANNOT be used with SEP02 - Slave Expansion systems.	Part No: LEM03-G2 24 zones maximum

LEM's connect within the CPU or SEP02 via short ribbon cable, they CANNOT be remotely sited. Each output can deliver 100 mA up to a combined auxilliary current of 1.35 Amp. Technical resources in the Comfort Technical Website.